If you've broken your phone screen, here are some tips for display replacement. We will bring you a case iPhone X as a reference. All you need is a repair kit and a new screen. The repair kit should be included as below: tweezers, screwdrivers, pry piece, suction cup, heating pad, programmer, spudger, battery adhesive, and waterproof adhesive.

Before the screen assembly replacement, we need to check out the True Tone display function and whether it still works as usual or not to make sure the new screen will be working.

Firstly, please long press the phone to turn it off. Then you can use a pentagon screwdriver to unscrew the screws at the bottom of the phone. Please pay attention to putting the screws aside well. You can place the screen face down on the pad for about 2-3 minutes after the heating pad is up to the temperature of 70—80°c. And fix the suction cup at the bottom of the phone, lift the screen gently, and insert a pry piece underneath. Gradually move around the edge of the display, separating the screen along the gap. The display assembly is still connected to the iPhone by cables, so don’t try to remove it completely. Again, please pay attention to the position of the cable to avoid damage. The angle should not be greater than 90 degrees to prevent breaking the flex cable. The process of removing the cover is done.

Next, use a Tri-wing screwdriver to unscrew the screws on the shielding cover of the cable connector. You can use a spudger slightly to extricate the battery and the connector between the screen and motherboard. Now, continue to follow instructions step by step. Detach the earpiece speaker flex cable, and remove the old display assembly.

In order to retain the True Tone function on the display as everything in the iPhone is paired to another screen, it's suggested to make good use of a programmer. Fasten the old touch connector on the corresponding connector of the programmer, and start reading. After everything is done, take off the old screen assembly, connect the new one to the programmer, and start writing.

Please connect the new screen assembly to the programmer, start writing, then place the old screen assembly on the heating pad. You can use a Tri-wing screwdriver to unscrew the screws of the earpiece cable and take out the earpiece. Tear off the protector of the new screen assembly and reassemble the earpiece cable on the new screen assembly. Lastly, tighten the screws. Please pay attention to the position of the grounding chip. Finally, we come to the connection part. Please connect the display cable, touch cable, earpiece cable, and battery accordingly.

If there is something wrong with the repair process or assembly issue, it's better to do some tests after replacing a new screen.

It is the same step as the beginning. Long press to turn it on to do some screen test first. We need to do several tests: 3D touch testing, True Tone testing, and light adjustment testing. If your phone shows, all is usually working. Then you can tear off the waterproof adhesive and make it adhere to the phone body. Press lightly with tweezers to make it adhesive, tear off the film, reassemble the display cable, and touch the cable. And the earpiece assembly, and connect the battery. Install the shielding cover, and tighten the screws. Take off the waterproof film around the frame. Buckle the phone screen, and tighten the screws at the bottom.

Those are all iPhone X screen replacement steps we share with you. If there is any confusion, please leave us your comment.

The basic tool for phone repair we can see commonly in the market is only for high-temperature soldering or heating the screen, such as the CPB heat mat.

But what about the repair tool with multifunction?

REFOX RS30 ESD Repair Heating Pad is a multifunctional repair tools for cell phone back cover separation and screen removal, also for simple repairs to high-temperature soldering. It's made of silicone material and owned with the utility patent. There are other functions, such as magnetic storage for the components.

In the following introductions about RS30 Repair Heating Pad, let's explore its features and advantages. 

-- Large working area

-- Get to temperature quickly with temp control

-- Built-in temperature control module to prevent overheating 

-- Non-toxic silicone soldering mat with heat resistance up to 100°C

-- Three stunning colors

    • Multifunctional design, repair parts storage, and heating as one

    • Photo-oxygen coating
    • -- Anti-fouling 
    • -- Anti-static
    • -- Anti-corrosion
    
    • Built-in aerogel insulation cotton, uniform heating and reduce the risk of breaking screens

Application

• Back cover separation (Android) 
• Screen removal (iPhone, Android, tablets) 
• For simple repairs to high-temperature soldering

The difference between RS30 Repair mobile phone heat pad and other repair mats is its Utility Patent which means it's practical and creative in the repair market. 
    

Recently, some vendors sold outcell as incell on the market. Today's post is to help you tell outcell and incell.

In the first place, we have to know their structural differences. The biggest difference is the position of the touch panel. Incell's touch panel is embedded in the glass substrate, while outcell is above the polarizer and under the glass lens

The display and touch flex cables of outcell are separate while incell integrates two flex cables. Incell must be used with TDDI IC.

Outcell features a separate touch panel while incell’s touch panel is embedded in the glass substrate

For your reference, we have published a detailed video about how to choose aftermarkt iPhone screen assembly. There are various kinds of screen assembly products with uneven quality, which makes many customers confused when placing orders. Therefore, REWA has set a stringent standard for selecting products to ensure customers’ shopping experience, aiming to select the best quality screen assembly product with the highest cost performance on the market. REWA hopes to make customers shop without worries and rest assured to use assembly products selected by REWA.

Based on display technology, common screen assembly can be divided into OLED and LCD. According to different structures of the touch panel, the screen assembly can be divided into incell, oncell and outcell.

The biggest difference is the position of the touch panel. Incell's touch panel is embedded in the glass substrate, oncell is above the glass substrate and under the polarizer, while outcell is above the polarizer and under the glass lens.

Different iPhone Screen Assembly Structures

incell-LCD

G+G/G+F-LCD

G+F-OLED

Oncell-OLED

A+ iPhone X Screen Assembly

There are three OEM screen assembly suppliers for iPhone 7, iPhone 7 Plus, iPhone 8, and iPhone 8 Plus while there are only two OEM screen suppliers (LG and JDI) for iPhone XR and iPhone 11. The backlight numbers of the three suppliers are LG - DTP & C3F, Sharp - DHK & C01, Toshiba - C11 & F7C. 

LG is the universal version with high compatibility while Sharp and Toshiba feature poor compatibility.

If your original screen is LG and you want to replace it, your best choice would be LG because it has superior compatibility and is not easy to have a touch problem. If your original screen is Sharp and Toshiba, you can choose the corresponding screen type and LG will work too as it is the universal version.

If you want to replace your screen with one of these screens, your original screen must be OEM, Pull, or REFURB with the original backlight.

Display Comparison (iPhone7 and iPhone 8)

Display Comparison (iPhone 7Plus and iPhone 8 Plus)

Display Comparison (iPhone XR and iPhone 11)