Wish List

Cart

PRODUCTS

I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max
  • I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max

I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max

Price:
$0.00
Quality Grade:
OEM New
Quantity:

(MOQ: 1)

Shipping Fee:

$0.00 By Logistics to Country

Estimated shipping time: 1 - 10 working days
Total:

$0.00


I2C Dot Projector Repair Tools And Materials Kit For iPhone X-11 Pro Max


This kit is for the Face ID dot projector repair

For now, the most cost-effecive and efficiency Face ID repair method





Items Included

1 x Dot Projector Repair Programmer Face ID - V8 ( 7pcs of Dot projector cables included )

1 x Face ID Module Hold Fixture For iPhone X-11 Pro Max

1 x Lattice Dot Projector Hold Fixture

1 x 4A Sculpture Knife For Face ID Repair (10pcs/pack) 

1 x Face ID Lattice Repair Hold Fixture For iPhone X-11 Pro Max

1 x LOCTITE 460 Instant Adhesive 20g



Features

1. Offline read & write

2. Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max

3. Support Chinese & English menu switch

4. Non-trace repair, green pass the 3UTools

5. Chip non-removal low repair risk

6. Low power consumption and no current leakage

7. Can be adapted to the latest iOS system perfectly


Operation Process

1. Connect with original flex cable, press ‘Test’ button to test the flex cable condition

2. Press ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )

3. Connect the i2C dot projector flex cable with host machine, then press ‘Write’ button to write the data.

    (Do not power off during the operation process to avoid loss of data)

4. Cut off the shielding cover soldering joint pads with grinding pen

5. Heat with hot air gun and separate the dot projector board from the glass lens with sculpture knife

6. Take down the MOSFET then short the pin as shown in the figure

7. Reball the pads on the flex cable

8. Apply solder paste then solder the dot projector board to the flex cable

9. Test the flex cable working condition after the soldering

10. Put the flex cable into shielding cover and keep the flex well aligned with glass lens



________________________________________________________________________________________________________________


Packing

Carton box packing


After-sale service

Please feel free to contact us for any problems at any time: service@rewatechnology.com


Contact Us